Reva Fccs 5 Litre Reva Cleaner Hard Industrial Use
Introducing Reva FCCS, a high-performance floor cleaner concentrate designed specifically for maintaining cleanliness in external and back office areas. This powerful cleaning solution is expertly formulated to tackle tough dirt, stains, and grime, making it an essential product for both commercial and industrial settings. Reva FCCS is perfect for use in areas with high foot traffic, such as corridors, entryways, and workspaces. Its concentrated formula delivers superior cleaning power, ensuring that surfaces are left spotless and hygienically clean with minimal effort. The solution penetrates deeply to lift away dirt, leaving floors looking fresh and well-maintained. Available in a convenient 5-liter size, Reva FCCS is economical and easy to use. A small amount of concentrate mixed with water goes a long way, making it a cost-effective solution for large-scale cleaning tasks. Its versatility allows it to be used on a variety of floor types, including tiles, stone, and concrete.
Product Overview
Reva FCCS is a concentrated hard surface cleaner formulated for heavy-duty cleaning of mineral deposits, limescale, cement residue, and construction contamination on hard floor and wall surfaces. It is used in post-construction cleaning, periodic deep-clean descaling programmes, and industrial facility maintenance where standard floor cleaners are insufficient. Available in a 5-litre institutional format wholesale through JKD Enterprises with dispatch within 24–48 hours.
Primary Buyer: Post-construction cleaning companies, facility maintenance teams, hotel engineering departments, industrial facility managers, cleaning chemical distributors. Dispatch: Within 24–48 hours of order confirmation.
Product Description
Reva FCCS is an acid-based concentrated cleaner specifically formulated for the removal of hard mineral deposits that accumulate on floor tiles, wall tiles, and grouted surfaces in institutional settings. Limescale from hard water, cement and grout residue from construction or renovation work, calcium deposits on bathroom tiles, and mineral scale on kitchen floor tiles are the primary targets. These contamination types form chemically bonded surface layers that surfactant-based cleaners and even mechanical scrubbing cannot adequately remove the acid in FCCS dissolves the mineral bond, allowing the deposit to be rinsed away.
In post-construction handover cleaning, FCCS is a first-stage product used before standard floor cleaning is commenced removing cement smears, grout haze, and mineral splatter from new tile installations. In ongoing institutional maintenance, it is used periodically (monthly or quarterly) on tile floors and grout in hard water areas to remove scale buildup before it becomes embedded and visually apparent.
For daily floor maintenance between FCCS treatments, Reva CS04 perfumed detergent or Reva Maklin floor cleaner handles routine mopping. FCCS and daily floor cleaners work in a complementary programme: daily cleaners maintain surface cleanliness, FCCS removes mineral accumulation that daily cleaners cannot dissolve.
Safety note: FCCS is an acid-based product. Do NOT mix with bleach or bleach-containing products. Apply PPE. Do not use on natural stone (marble, limestone, travertine) acid will etch and damage natural stone surfaces.
Features and Benefits
- Acid-based concentrated formula dissolves limescale, cement residue, grout haze, and hard water mineral deposits
- 5-litre institutional format cost-efficient for large-area post-construction and periodic deep-clean applications
- Effective on ceramic and porcelain tiles and grout the primary institutional hard floor surface treated
- Post-construction application removes cement smears and grout haze from new tile installations
- Periodic descaling use dissolves scale buildup that accumulates in hard water institutional environments
- Concentrated formula high yield per litre for large treatment areas
- Dispatch within 24–48 hours
Directions for Use
- Dilute Reva FCCS at the recommended ratio (confirm on label typically 1:5 to 1:10 with water for general descaling; higher concentration for post-construction cement removal).
- Apply to the floor or wall surface using a mop, brush, or sponge.
- Allow 5–15 minutes contact time depending on deposit severity.
- Scrub with a stiff brush if required.
- Rinse thoroughly with clean water full rinsing is essential to remove acid residue from the surface.
- Neutralise with a dilute alkaline cleaner rinse if specified by the client’s cleaning protocol.
Critical cautions:
- Do NOT use on marble, limestone, travertine, or any natural stone acid will permanently etch the surface.
- Do NOT mix with bleach or chlorine-based products.
- PPE mandatory: acid-resistant gloves, eye protection, adequate ventilation.
Application Method
Setting: Post-construction tile cleaning, hotel bathroom tile descaling, institutional kitchen floor descaling, commercial building handover cleaning.
Equipment: Mop and bucket for floor application; stiff brush for grout lines and tile edges; pressure rinse for thorough removal.
Frequency: Post-construction: one-time initial application. Ongoing maintenance: monthly to quarterly in hard water areas, based on visible scale buildup.
Storage: Store in original sealed container in a cool, dry location. Keep away from bleach products and children. Shelf life: 24 months unopened.
Product Specifications
| Specification | Detail |
|---|---|
| Product Name | Reva FCCS Hard Surface Cleaner |
| Brand | Reva (Institutional Range) |
| Pack Size | 5 Litre |
| Formulation Type | Acid-based concentrated hard surface cleaner |
| Target Deposits | Limescale, cement, grout haze, hard water scale |
| Suitable Surfaces | Ceramic tile, porcelain tile, grouted surfaces |
| Not Suitable For | Natural stone (marble, granite, limestone) |
| Incompatible With | Bleach and chlorine-based products |
| PPE Required | Acid-resistant gloves, eye protection, ventilation |
| Shelf Life | 24 months (unopened) |
| Storage | Cool, dry; away from bleach and children |
| Dispatch Timeline | Within 24–48 hours |
| Available For | Wholesale / bulk B2B orders |
| Supplied By | JKD Enterprises, pan-India |
Dispatched Within 24–48 Hours
Reva FCCS is dispatched within 24–48 business hours of confirmed order. JKD Enterprises supplies post-construction cleaning companies, facility maintenance teams, and cleaning chemical distributors pan-India.
Frequently Asked Questions
Can Reva FCCS be used on marble or natural stone floors?
No. FCCS is an acid-based product and will permanently etch and damage natural stone surfaces including marble, limestone, and travertine. Use only on ceramic and porcelain tiles.
Is Reva FCCS suitable for removing cement smears from new tile installations?
Yes. FCCS is well-suited to post-construction cement and grout haze removal from ceramic tile surfaces. Use at higher concentration for cement residue, dilute further for maintenance descaling.
What PPE is required when using Reva FCCS?
A: Acid-resistant rubber or PVC gloves, eye protection (goggles), and adequate ventilation are mandatory. Avoid skin contact and inhalation of vapours during application.
What is the MOQ for wholesale Reva FCCS orders?
Submit an enquiry at jkdenterprises.in for current wholesale MOQ and volume pricing.
Can FCCS be used alongside bleach-based cleaners in the same facility?
A: Not simultaneously and not without thorough rinsing between applications. Acid and bleach must never be mixed the reaction produces toxic chlorine gas. Apply in separate operations with complete rinsing and ventilation in between.
